INTERIOR THERMAL INSULATOR PLASTER

Description

Fixper Insulation’s Interior Thermal Insulation Plaster is a premium, ready-mixed plaster specifically designed for interior applications, providing exceptional heat, sound, and fire insulation. Composed of Portland cement, expanded silicates, and inorganic fillers, this plaster meets European filler directives and ISO standards for environmental and health safety. Enhanced with eco-friendly additives, Fixper Insulation Interior Insulation Plaster is ideal for energy-efficient, soundproof, and fire-resistant interiors in homes and commercial spaces. This high-performance insulation plaster ensures long-lasting protection and aligns with sustainable building needs, making it a top choice for superior interior insulation solutions.

Usage areas
It is used directly on the exterior walls of the buildings, columns and beams, on rough and fine plaster, brick, pumice bloc. Primer, must be used necessarily on concrete, gas concrete and painted surfaces.

Surface preparation
Blistered paint and spaced plasters are scraped off the surface. 4-5 notches per 10 cm² press on painted surfaces. The application surface should be cleaned from dust. Priming must be done on painted surfaces.

Application
Fixper Insulation’s Interior Insulation Plaster is a premium, ready-mixed plaster specifically designed for interior applications, providing exceptional heat, sound, and fire insulation. Composed of Portland cement, expanded silicates, and inorganic fillers, this plaster meets European filler directives and ISO standards for environmental and health safety. Enhanced with eco-friendly additives, Fixper Insulation Interior Insulation Plaster is ideal for energy-efficient, soundproof, and fire-resistant interiors in homes and commercial spaces. This high-performance insulation plaster ensures long-lasting protection and aligns with sustainable building needs, making it a top choice for superior interior insulation solutions.

Application details
In manual application, it should be mixed with ~ 8-10 liters of water with low speed (400-600 rev/min) drill for 3-4 minutes. In machine application, it should be pumped to the surface by mixing with 8-10 liters of water in average. When the desired thickness is reached, it should be allowed to dry.

Application conditions
Application surface and ambient temperature should be above 5 °C. Considering excessive moisture loss at temperatures above 35 °C, mixing water should be increased and the surface should be kept moist by wetting for 1 day after the surface hardening phase.

Issues to be considered
Avoid application under strong wind or sun. The time increases at low temperatures and the time decreases at high temperatures. It should not be applied on frozen, melting or freezing surfaces within 24 hours. Appropriate plaster mesh should be used at different material junctions and points where movement may be considered.

Storage transport
Protect from frost, rain and other weather conditions. 70 Bags in 1 pallet is 3.500 L.

Environmental impacts
Not classified as dangerous.

Available on www.azoomar.com